SB05 PUI clean room panel

Ref : SB05 PUI

Panel bordered on four sides with a treated aluminium section allowing it to be assembled by a 33x30 key and to be flush with the floor when placed on the footing

Panel weight = 13.3 kg/m² 
Max. ceiling span = 5.00 m 
Fire classification B-s2-do (equivalent to M1) 
Core made of injected polyurethane with an average density of 50 kg/m3, obtaining a lambda of 0.032 W/m²C

Main characteristics

Facings made of double-sided S280GD + Z225g galvanised sheet steel with thickness 6/10 according to standard NF EN10-147, made up of: 
-Back: priming lacquer 5 to 8 µm 
-Front: priming lacquer 5 to 8 µm 
25-µm polyester lacquer finish, continuously pre-lacquered according to standard NF P34301 RAL 9010 white 
Gloss of 30% 
Fusible or adhesive protective film, thickness: 80 to 120 µm 
 
 

Available dimensions

Single thickness = 50 mm 
Standard width = 1200 mm 
Non-standard width = 400 to 1199 mm 
Maximum length = 5000 mm for 1200-mm module 
Maximum length = 4000 mm for the other modules 

Range and options

DoP SB05PU

Ancillary products

PCSB Sliding door Polyurethane
Single-leaf or double-leaf sliding door

PSBN PUI semi-flush door
Hinged door basically made up of: • BAC leaf, thickness 50 mm Two facings of galvanised sheet steel, thickness 75/100, 25 µm polyester lacquered finish,...

PSSB PUI Double-flush door
Hinged door basically made up of: • BAC leaf, thickness 50 mm Two facings of galvanised sheet steel, thickness 75/100, 25 µm polyester lacquered finish,...