Metal panels MF panel

Ref : MF

• Used to install cold stores and air-conditioned buildings designed to produce, pack, store and distribute foodstuffs.

• Behaviour in fire B-s2, d0. 
• Tongue and groove assembly. 
• Recessed sealant to make joints airtight and watertight. 
• Invisible fixings. 

Main characteristics

Injected polyurethane foam, average density 40 kg/cu. m. 
Compressive strength (or distortion stress of 10%) : minimal value 0.10 MPa. 
Reinforced insulation: λ= 0.032 W/m.K. 
Facings 
- Z 275 galvanised steel sheet, bare, 0.6 mm thick. 
- Z 225 galvanised steel sheet, coated, 0.6 mm thick. 
- Polyester lacquer finish, 25 μ thick, as standard. 
- Colours: white 9010, sand 42. Other colours: see RAL colour chart. 
- Other possible coatings: PVDF 35 μ, PVC 120 μ, Pet 55 μ (indoors only) 
- Protective film: transparent heat-sealing adhesive, thickness 80 to 120 μ. (except Pet: adhesive film 35 μ thick) 
• Option: sheet steel 0.75 mm thick. 
- 304 or 316 stainless steel sheet, 0.6 mm thick 
- Opaque protective film. 

Available dimensions

Module: 1,200 mm. 
Max. length: 12 m. 
Thickness: 60 - 80 - 90 - 100 - 130 - 160 - 180 - 200.