Leaf
• Leaf thickness 60 mm.
• For 800/900/1,000 mm, double faced with steel sheets, white RAL 9010 polyester lacquer 25 μ thick, without aluminium
surround (1).
• For width 1,150 mm, double steel sheets, white RAL 9016 polyester lacquer 25 μ thick, without aluminium surround (1).
• Thickness of the steel sheet facings 0.6 mm or 0.75 mm depending on model.
• Polyurethane insulating core, press injected (2).
• Right or left hand opening (please stipulate at time of order).
Frame
• Aluminium in 2 parts.
• Exterior aluminium frame with thermal break (3).
• Interior aluminium frame (4): lower frame crosspiece set flush with floor.
• Polyrene opening trim 3 mm thick (5).
• Frame assembly by counter-drilling the partition and inserting threaded studs (6).
Fittings
• Clip-on sealing joint (7) (with aluminium frame).
• Single-point composite closing. Key operated locking system, plate type
interior emergency unlocking system.
• Adjustable sealing skirt at the bottom of the door (6) that can be positioned to suit the floor.
• Composite rising butt hinges (galvanized pins).
Options
• Fitting on masonry
• 304 grade stainless steel frame, thickness 1.2 mm, in 3 parts, C profile (3).
- Frame assembly by counter-drilling the partition and inserting threaded studs.
- Fixings going through the partition (4).
• Facing
- Steel sheet 0.75 mm thick available in the following colours Green RAL 6018 - Red RAL 3000 - Blue RAL 5002 - Yellow RAL 1018.
- Attention: maximum clear width = 970 mm / no coloured steel sheet option for the 1,150 mm width model.
• Accessories
- Methacrylate visibility window 400 x 600 (width x height) for leaf thickness 60 mm.
- BRICARD 497 door closer, silver grey
(BRICARD 605 for 1,150 mm width).
- Panic push bar.
- Stainless steel base protection (height 850 mm).
PassDoor supplied with assembly and serviceinstructions identified by a serial numberage for handling rail.
This type of door is available in 4 standard dimensions.
.